The parts to be attached to the PCB are
shown at left. Identify each one, and lay them out where you can keep
track of them. The letters indicate the recommended order of assembly.
(An
Excel spreadsheet with a suggested supplier and details about how
to order each part is available through
the link at the bottom of this page.)
A |
Circuit Board |
1 |
B |
Resistor, 10 kohm, 1/8 W |
1 |
C |
Resistor, 220 ohm, 1/4 W |
1 |
D |
Diode, 1N4001 |
1 |
E |
Sockets, DIP 14 pin |
2 |
F |
Socket, DIP 16 pin |
1 |
G |
Terminal Blocks, 2 position |
3 |
H |
Terminal Block, 6 position |
1 |
I |
Fuse, resettable, 1.10 A |
1 |
J |
Fuse, resettable, 0.30 A |
1 |
K |
Header, right angle, 3 position |
1 |
L
|
Voltage regulator, 7805 |
1 |
M |
Modular jack, 6P6C, side entry |
1 |
N |
LED |
1 |
O |
IC, 7408, quad "AND" gate |
1 |
P |
IC, 7404 hex inverter |
1 |
Q |
IC, ULN2003A, Darlington array |
1 |
R
|
Standoffs, 0.375", nylon |
4 |
S |
Screws, nylon |
4 |
Click here for a spreadsheet with details about each part.
|
